Saturday, August 18, 2012

Thermal Validation in the Pharmaceutical Industry

Considerations in Selecting a Temperature Sensor

The pharmaceutical industry is a highly regulated environment based on research, evidence, record-keeping, and validation. The term "thermal validation" is the process of validating / qualifying equipment and storage facilities to prove that they will create and maintain the temperatures they are designed for.
For those responsible, choosing the right temperature validation tool is decision #1 - and making that choice requires a thorough understanding of different sensor types. This paper will specifically focus on two common sensors: thermocouples and thermistors (see table below).
The following article will discuss the advantages and disadvantages of each sensor, especially as they are used in the pharmaceutical industry. But first, a brief definition of thermocouples and thermistors:
  • A thermocouple is made of two dissimilar metals in contact with each other. The thermocouple works by generating a small voltage signal proportional to the temperature difference between the junctions of two metals.

  • A thermistor is a resistive device made up of metal oxides that are formed into a bead and encapsulated in epoxy or glass. As temperature changes, so does resistance, causing a large voltage drop.
The follow table describes the stability, temperature ranges and gives brief details about the differences between thermocouples and thermistors.

Thermocouple Thermistor
Temp. Range -270 to 1800°C
(-454 to 3272°F)
-86 to 150°C
(-123 to 302°F)
Sensitivity Low High
Stability Low High
*Time-savings Lengthy set-up Minimal set-up
*Sources of Error Many Few
*Accuracy Low High
Ideal Applications High temperature oven profiling, Cryogenic freezing Warehouse monitoring, Stability testing, Chamber qualification, Cooler and Freezer, Monitoring, Lab monitoring, Cold Chain monitoring.

* This comparison looks at a total data logging system, and not just the sensor.

Temperature Range: The Key to Selecting Sensors

Thermocouples offer the widest range of measuring capabilities, which admittedly makes them a suitable choice for extreme temperature applications such as oven profiling and cryogenic freezing.
However, in the range of -86 to 150°C (-123°F to 302°F), thermistors become an option, and for most applications they are the better choice. Thermistors are primary sensors, meaning that they operate independently, without the need for a second reference sensor.
It is important to note that other systems, including thermocouple systems, often use thermistors as the reference sensor.

Data Loggers & Temperature Sensors

The stated temperature range of -80 to 150°C (-123°F to 302°F) is just for the thermistor itself, and not for an enclosed Veriteq data logger. Veriteq data loggers are designed to withstand the range of -86 to 85°C (-123°F to 185°F) meaning that the loggers themselves can be placed in the temperature environment and left there. This makes them an ideal solution for chamber qualifications, stability testing, warehouse, cooler and freezer monitoring.
Veriteq's data logger used in the higher range of 85°C to 150°C (185°F to 302°F) requires an external thermistor probe that allows the connected logger to remain outside the high temperature environment.

Sensitivity: Of Voltage & Signal Size

The term sensitivity refers to the size of signal received in response to a temperature change, and is an important component of sensor accuracy. Thermistors are highly sensitive; in fact the name thermistor evolved from the phrase "thermally sensitive resistor."
Stuart Ball, an electrical engineer and author for writes that "of all passive temperature measurement sensors, thermistors have the highest sensitivity."
In comparing thermistors with thermocouples, Ball goes on to say: "The voltage produced by a thermocouple is very small, typically only a few millivolts. A type K thermocouple changes only about 40 microvolts per 1°C (1.8°F) change in temperature."
With such a minute voltage to measure, it becomes difficult to distinguish an actual temperature change from noise. Enercorp Instruments Ltd., a provider of thermocouples and thermistors, speaks directly to this issue:
"The voltage produced is very small and amounts to only a few microvolts per degree Celsius. Thermocouples are therefore not generally used within the range of -30 to 50°C (-22 to 122°F)."
The graphs below show the increased sensitivity that a thermistor-based system detects as compared to a thermocouple system.
Low thermocouple sensitivity makes it hard to distinguish real changes from noise

High sensitivity of Veriteq system makes distinguishing real changes easy

Stability: How Accurate for How Long?

Thermistors are very stable, which makes them ideal for portable applications such as warehouse and chamber qualifications. For example, Veriteq data loggers can be moved frequently without calibration, and still maintain an accuracy of +/- 0.15°C (+/-0.27°F).
To prove the point, Veriteq recently checked the calibration of 106 data loggers after a year of use in the field. Each logger was checked at the following calibration points: -20°C, 25°C, and 70°C. The results were impressive, showing less than 1% of the points to have any excess drift. Still, Veriteq recommends that data loggers are re-calibrated on a yearly basis.
Thermocouples, on the other hand, are known for low stability, which is why a pre-cal / post-cal is required with every use.

When a Sensor Saves Time: Set Up & Stability

A Veriteq data logger is a system in itself,easy to use, quick to set up and self powered. With on board memory, the data is not vulnerable to loss through power or network interruption.
Each data logger, containing a thermistor, is simply configured to the desired sampling frequency and then placed in the monitoring location. Following the test period, the data is downloaded. The system is very straightforward and doesn't require any stringing of wires. Validation without stringing thermocuouple wires reduces set up time and downtime in a high-traffic environment. The result is a significant time savings.
By contrast, a thermocouple based set-up is often time consuming, especially for high-accuracy applications requiring a pre- and post-calibration. For example, qualifying a chamber with a thermocouple system involves first putting all sensor ends (i.e. the hot junctions) inside a calibration unit and going through the pre-calibration process.
Following a successful calibration, the thermocouples are strung from the central data logging unit, to the chamber, through a door seal, and then taped into various positions. Care must be taken to keep a good seal on the door while minimizing damage to the thermocouple wire.
Once the data collection begins, all thermocouple sensors must still be moved to the calibration unit for post-calibration. Finally, it is not uncommon for thermocouples to fail the post-calibration, meaning that the whole process may need to be repeated.

Sources of Error: Cold Working, Cold Junctions, Calibrations

Being a self-contained unit means that Veriteq data loggers have less error sources to deal with - there are no wiring errors, no cold junction errors, and no errors associated with in-field calibration (see table below).

Thermocouple System Veriteq Thermistor System
Physical damage to sensor "Cold working" degrades thermocouple wires as they are repeatedly bent, stepped on, or shut in chamber doors. There is minimal risk because the thermistor sensor is protected inside the data logger
Non homogeneity
Consistency of thermocouple wire and the environment it runs through
Always present to some extent N/A
Cold Junction reference error
Temperature deviation between cold junction reference point and the actual cold junction; includes accuracy of cold junction sensor
The single largest source of error N/A
Pre & post calibration errors:
Reference transfer calibration error; traceable temperature standard; environmental stability; movement of sensors
In-field calibration introduces many sources of error Pre & post calibration is not required
Operator Error High level of knowledge required to minimize errors Less risk as the system is relatively simple
Analog to Digital conversion Minor Minor

Thermocouple systems have numerous sources of error, the most significant being the cold junction reference error. Goran Bringert, of Kaye Instruments, states the following:
"A change in ambient temperature is the most significant source or error in thermocouple measuring systems, particularly multi-channel systems with internal cold junction references"

Accuracy: Give or Take a Margin of Error

High accuracy is critical for temperature validations because of the 4:1 rule, which recommends that instruments be at least four times as accurate as the parameter being measured/validated. Therefore, Veriteq data loggers, with their accuracy of ±0.10°C (±.27°F), can be used to monitor/validate parameters as tight as ±0.60°C (±1.1°F).
As for thermocouple based systems, a leading provider claims to have a total system accuracy of ±0.28°C (±0.5°F). While this may be true from a theoretical point of view, it would require having optimal conditions available.
Other industry experts believe that ±1 to 2°C (±1.8 to 3.6°F) is a more realistic accuracy for such a system, meaning that it could be used to validate parameter specifications of ±4 to 8°C (±7.2 to 14.4°F), applying the 4:1 rule. In any event, very few people dispute the fact that thermistors are more accurate than thermocouples.


When choosing a system for performing thermal validations, the first question asked should be "what kind of sensor is being used?"
Thermocouple sensors should be avoided because they involve a lengthy set-up, numerous error sources, and marginal accuracy. It would be best to restrict thermocouple systems to applications involving very high or very low temperatures, simply because there are no other choices available at those extremes.
In contrast, thermistor sensors are ideally suited to high accuracy monitoring in the range of -86° to 150°C (-123°F to 302°F). The Veriteq thermistor based system is highly sensitive, stable, accurate and easy to use.
Using a thermister-based device for validation eliminates the many error sources associated with thermocouple systems and allows for a much quicker set-up time. In short, you save time, experience less downtime and obtain high-accuracy results.

No comments: